Casting Division
Process Facilities
PROCESS & TYPE QUANTITY MAKE SPECIFICATIONS
L:R: CUPLOLA One Local 42" ID; Clod blast Oxygen enriched
Moulding and core making Manual - CO2 and No Bake process
Heat Treatment Use outside sub - contract facilities
Machining
Process Facilities
PROCESS QUANTITY MAKE SPECIFICATIONS
Turning One Kirloskar 1.5m, 300mm chuck, 500mm max. diameter
Drilling One Kold 1m Radial, 55mm max. dia drill
Planing One Boel Ringer Table length - 5m; Table width - 1.2m; Height - 1.2m;
Milling head spindle dia-160mm; four tool post
Horizontal
Boring
One Collet Spindle-dia. 85mm; (ISO 40); Table size - 1000x125mm
Head stock travel on column - 800mm.
Jig boring One WMW Micromat Table Size - 900x1400mm; Spindle travel on cross rail
700mm; Table travel 1050 mm; Spindle-dia. 125mm (MT4)
Floor Boring One TOS Spindle-dia. 130mm; 3.6m X-axis; travel; 2.6m Y-axis travel; 1.2m Z-axis travel
Milling One TOS Table Size - 1.2m length x 450mm width x 500mm height.
Inspection and Other Facilities
TYPE OF INSTRUMENT MAKE QTY SPECIFICATIONS
Micrometer Mitutoya TGL 9 0 to 150mm in steps of 25 mm; 165 to 300mm 300 to 400mm.
Vernier Calipers   7 0 to 125, 300, 500 and 1000 mm.
Slip Guage Somet 1 46 Pieces
Bore Guages Mitutoya / VEB 5 18-35; 35-60; 50-100;165-300 mm.
Dial Gauges Mitutoya 8 0.01 mm indicator
Height Guage Auklionim 2 0-300;0-1000 mm
Depth Gauge   2 0-200; 0-300 mm
Inside Micrometer   5 30-40; 40-50; 50-60; 60-75; 75;100 mm
Plug Gauge   3 6H 11; 25H 7;300 H 7
Inside Caliper   2  
Outside Caliper   2  
Comb Caliper   3  
Feeler Gauge   2 Sets  
Pitch Guage   2 Sets  
Scales   3 0-300; 0-1000; 0-2000 mm
Tape   3 2 mtrs, 3 mtrs.
Try Squares   15  
Bevel Protractor   1  
Spirit Level   2  
Magnet stands, Pallet stands, Dove Tail parallel chucks, Parallel block
Angle Plates, V Blocks, Mandrels, Height Build up rollers, Dove Tail, Blocks etc.
25 to EOT Crane
Captive Diesel Power Generator facility


OTHERS :
Home aboutus Facilities products enquiry contact company